Baxter AP 2 Infusion Pump

The Baxter APII PCA Pump is a small, lightweight, linear peristaltic pump operated by battery or AC power. A key is required to open the fluid bag cover and to enter or change a prescription preventing unauthorized access or changes to the medication or prescription. Infusion options offered by the APII are continuous infusion and/or Patient Controlled Analgesic (PCA) infusion. The Baxter APII PCA Pump performs extensive self-testing that will continuously monitor the operation of the pump. The rate range for this unit is 1-1000 mg/hr, volume 1-250 ml.

• Modes of Operation: PCA, Basal + PCA, and Continuous 
• Flow Rate Accuracy: ±10% 
• Flow Rates: Basal Rate: 0.1 - 9.9 ml/hr 
• Continuous Rate: 0.1 - 19.9 ml/hr 
• PCA Dose, Bolus, and Priming Rate: 90 ml/hr 
• Occlusion Detection: 22 ± 10 psi measured immediately distal of the pumping mechanism 
• PCA Dose Volume Selection: 0.0 - 9.9 ml 
• Bolus Volume Selections: 0.0 - 9.9 ml 
• Reservoir Volume Selections: 1 - 1999 ml 
• One Hour Limit Selections: 0.1 - 60.0 ml/hr 
• Delay Time Selections: 3 - 240 minutes 
• Power Source: 9-Volt Alkaline Battery or AC Power Supply 
• Drive Mechanism: DC Motor, Microprocessor Controlled, Precision Linear Peristaltic Pumping Mechanism 
• Housing: Shock and Vibration Resistant ABS 
• Dimensions: 4.9" H x 3.4" W x 1.8" D without Fluid Bag Cover 
• Weight: Approximately 1 pound